Search results

  1. P

    23RFBA delivery in days; couple questions

    I have a 2019 R23CWA ESP with a 300 Yamaha. It’s propped with a 15 1/2 x 17 SWll mounted in the first hole. Max RPM’s 5800 and 48MPH, good hole shot and performs very well.
  2. P

    Prop selection for Q25 w/300 Verado

    I have a 19 R23CW with a cladded arch and Yamaha 300CA I’m running a 15 1/2 x 17 SW11 prop. I max out at 5800 RPM and 47 MPH. The boat does seem to sit low to the stern compared to my last boat a GCW with sport arch. My motor is also mounted in the last hole. I would like to get to 6000RPM but...
  3. P

    Change ladder??

    Sorry for the delay, yes it's the ladder in the picture. Jack let me know if you want to go look at it, I will let you know the location of my slip. Andy
  4. P

    Change ladder??

    My 2013 GCW came with a 3 step ladder, we had the dealer put a 4 step on and  it works great. Andy
  5. P

    Questions on 2274 GL order & about this forum.....

    We have the four step ladder , I think it's very sturdy and works great. Good luck with your order.   Andy
  6. P

    Arch Bimini Question

    Jack, I have to store mine in the floor storage, it's the only place large enough. I have left our bimini top up all season so far, so have not had to store it yet.   Andy  
  7. P

    Arch question .

    Jack, you push the light pole in and turn the collar on the bottom. Andy
  8. P

    Arch question .

    Jack, Not sure what you are asking for, I will be glad to help if I can. Andy
  9. P

    Boat Delivery with pics

    She's a beauty!!!   also very nice pic's. Andy
  10. P

    2375 RCW ESP Prop Suggestions

    I went with 15 1/4 x 18 salt water II-SDS, runs the boat 6000 rpm and 44mph. It was prop from a Yahama performance bulletin. Andy
  11. P

    Towing Cover For Benny ?

    I towed my 2375 450 miles with the factory cover on it , and it held up fine. I would not how ever use it if there was much wind. Andy
  12. P

    First Dent

    I put the first dent in our rub rail the second time we docked. My wife was there when I did it, now I can't blame it on my kids. Andy 
  13. P

    Got my new Benni today! Very Impressed!

    I like the seagrass floor also looks great! Andy
  14. P

    More pics of my boat

    Thats a super sharpe looking boat!!!! congrats Andy
  15. P

    Delivery day and lake trials

    A wise man once said " a cold day on the lake is better than no day on the lake."  Nice boat !!! Andy 
  16. P

    2 weeks vacation and a new boat!!!!

    Toon'r, The new motor ran just like the Yahama prop tests reported, 6000 rpm and 44 mph. It sure runs smooth, it's the first outboard I have owned. We have a condo in Kennel cove, just around point 7 Andy
  17. P

    2 weeks vacation and a new boat!!!!

    I will post some pic's when we get home from the lake Andy
  18. P

    2 weeks vacation and a new boat!!!!

    I'am sure you can't wait to get your new ride out on the lake! My wife and I just pulled our new one down to Table Rock from Omaha this weekend. Weather was great and we got even got the two hour break-in done. Hope to meet everyone in July. Andy
  19. P

    I'm shaving my head for childhood cancer ......

    Thanks for what your doing to help a great cause. My wife and I are blessed with two heathly kids and two heathly grand children. Andy
  20. P

    Lift set-up

    Thanks all for the info! Andy
Top