Search results

  1. R

    Suzuki 350 Outboard

    Have a zuke 115 on my boat. Preforms very well. I have low hours on mine (40+) so it's too early to tell on much else.
  2. R

    Need advice regarding 20 ft pontoon selection and options

    Simtex upgrade is a must for me. Also have you searched for similar boats in stock at dealers in your state. Most deliver for $150 flat fee. When I bought my boat I had settled on the 20 SLV because of price. Due to delays in delivery. I started looking at in stock in my state. I found a 20 SLM...
  3. R

    Underwater lights on toons

    I just finished doing mine. I didn't go with color changing lights. I had a left over 5M spool of blue LED's. I used them for under the seats. Instead of Led strip for underdeck Light I used 12v 1/2" led rope light. I used this rope light to light the inside of my pool (off grid solar system to...
  4. R

    Question on high RPM's at WOT

    Ok guys I think it's trim. and I think my trim gauge is not accurate. I usually run at 1/4 trim (on the gauge). Last night I noticed alot of "slack" between when I trim and the gauge reading. So I tried a run at 0, 6000 RPMS. So now I will just trim up until the bow lifts, not to 1/4 on the...
  5. R

    Question on high RPM's at WOT

    I also tested in calm (glass waters) this is a trioon. It doesn't hit rev limiter or cut spark but over rev light flashes. I trim up just until bow raises and then the gauge shows 1/4 on trim gauge
  6. R

    Question on high RPM's at WOT

    Now that the dealer is open I called them. They "think" it has a 13.785 X17P, they have to check with the other store that rigged it.
  7. R

    Question on high RPM's at WOT

    My eyes arent the greatest and taking a picture while on the water is a fun challenge. Anyone want to help figure out what it says only thing I can make out for sure is that it's a 17p
  8. R

    Question on high RPM's at WOT

    Boat is a 20' SLM SPS with a Suzuki 115. With full tank of gas and 2 passengers. Tach shows 6400 RPM, the over rev light on the engine monitoring gauge flashes. During my 1st long hard WOT run (about 20 minutes) in chop I got beeping and the engine dropped power and seemed to sputter until I...
  9. R

    Performance was disappointing during first WOT

    Just for reference 20' S model Tritoon, 115 HP 2 passengers, full tank gas, into a 3.9 mph current. I got 34.8mph for my 1st WOT at 6100 Rpm. 2nd time I got 35.5mph (gps)
  10. R

    New Member

    Dealer is shipping the cup holders.
  11. R

    New Member

    Break in on the motor is over. That also means I'm half way to 20 hour service. All my shore list has been completed. Got docking down better with her today. Also took her out on the St Clair river. 34.81 MPH against the current with my wife and I on board. Pretty impressed.
  12. R

    New Member

    Long day. Woke up too excited to sleep at 3:50 am, left the house at 7:45 am, got to the dealer at 11:45 am they said boats not ready and service guys are at lunch. So I went to eat. About 15 minutes later I get the call from the salesman that we had a miss communication and they had moved the...
  13. R

    What kind of trailer do I want?

    Do you need the ability to lower the boat to the ground? If so you will need a crank up. But be warned they are way more expensive for a tritoon. if you don't a floaton/bunk style is the way to go.
  14. R

    New Member

    I can't wait to unwrap this present.
  15. R

    New Member

    Speed limit is 75 on i69 in Michigan and no ones does under 85. But coming home I'm planning to take it easy with my baby on board :D Michigan amazes me you can drive for 10 hours and still be in state. Head the other way and your in Georgia in 10 hours.
  16. R

    New Member

    Tomorrow is the Day. 4 hours to get to her then 4 hours home.
  17. R

    New Member

    yes that was a huge factor in this. Its actually Lake huron and the ST clair river.
  18. R

    New Member

    A little update. The dealer I was originally going with can't seem to get the boat I was going to buy. Found another with a little better boat in stock. Sounds like I will pick it up Wednesday. 2019 20 SLM SPS with 115 HP
  19. R

    Crazy Mold After Shrink Wrap

    Had the same problem on my boat this spring. I used Concrobium mold stain eraser, Mix it up. Spray on with pump sprayer. Let dry. it dries to a salt like powder. Rinse. End of season I will spray seats with Concrobium mold control.
  20. R

    Can anyone enlighten me on Model numbers

    SLV, SLX, SLM etc... I order an SLV an know 100% what it comes with. But I'm starting to get antsy and want a boat now. Since I got lucky and sold the old pontoon in 1 day.
Top