Search results

  1. S

    Radio

    Need a little help with my radio problem. Hooked up both batteries on my 2014 2375 RCW. Put her in the water and took a little ride, first one of the season. Set back to enjoy the stereo.  Hit power switch nothing happened, no power to the radio. The radio worked at the end of last season now...
  2. S

    Paint Match

    I'm replacing both bow panels that were damaged by a huge wave. The bow and portside gates are not damaged. I would like NOT to replace the gates to keep replacement cost down. But I am concerned about the paint not matching. The boat is only 14 months old. Looking for any suggesting. Has anyone...
  3. S

    Cruiser Wake

    Had a Great weekend at Lake Cumberland, Lot of boats.for the Thunder Run which was held this weekend. I did have one bad exception this weekend. I hit two huge rollers from a cruiser. My 2014 2375RCW took a huge hit when the cruiser decider to start plowing through the water just before we...
  4. S

    Aluminum Rails

    Hanging bumpers on the aluminum rails has created black marks on the rails. Any suggestions on how I can get the marks off the rails without damaging the finish on rail? 
  5. S

    Oil Pressure Gauge

    This is my first pontoon and my first outboard motor. I love them both. Coming out of a power boat, i had a few reservations about comfort and handling. Not any more This 2375RCW is out standing in both areas. Okay, on my gauges i have three.One for RPM, one for speed and third one has trim...
  6. S

    Numbers

    Has anyone used Domed Lettering Co to make registration numbers for their pontoon? This company uses the same font as Bennington. I would like that look for sure. My concern is the weight of the numbers because of the material they are make of is heavier than vinyl numbers. How will do the...
  7. S

    Table Plug

    If anyone is looking for a plug to fill the hole in the floor when you remove the table Cascade Depot in the distributor for Springfield Marine the company that supply the captain chairs and table for Bennington. The part number is 210009-B cost $3.75.
  8. S

    Lift position

    Anyone have a lift? I am having my two bunk lift converted to a three bunk lift to accommodate my 2375RCW elliptical. My question is how far back toward the engine should the lift bunks be? The guy who did the conversion has the bunks 31/2 feet from the engine. The lift bunks are 14 feet long...
  9. S

    Mirror and Bumper

    My new 2375rcw has arrived not it's time to outfit it. I read in the forum about ski mirrors, bumpers and bumper hangers and lettering and numbers that look like bennington's letter/ numbers. Now I can't find the info. I welcome any and all suggestions. Thanks. I'm so excited my boat is in...
  10. S

    Lift

    Hey, does anyone use a Hydrohoist Lift? If you do can you post some photos of the lift without the boat on it. Or maybe someone know the answer to this post without photos.  I would like to know if Hydrohoist uses V shaped bucks for each toon on not. I have an ESP on the way any-day now I hope...
  11. S

    Playpen RCW

    I am waiting for the day the dealer calls to tell me my benny is in. So as I wait I have been reading the forum. The forum is great so many folks ask questions and those questions lead into great discussions. My question is does anyone know if the playpen cover on a 2375RCW covers the aft deck...
  12. S

    Pontoon Lift

    I am back and asking for more advice. I ordered a new 2375RCW with the ESP package.I need to convert my two bunk Hydrohoist lift to a three bunk lift. First has anyone out there done this? Secondly, does anyone have setup measurements foe the esp tubes. I contacted the dealer and they email me...
  13. S

    Ship to Shore Radio

    Thanks for all your help I am getting closer to ordering my 2375R, May be this week. I have a couple questions. Where is the best place to mount a S to S radio so it's not in the way. Any opinion on quick clips versa button snaps.
  14. S

    250 hp motors

    Looking for input from anyone that has information on the pros or cons on Mercury and Yamaha motors. I boat on Lake Cumberland. I've heard that service for Yamaha is hard to find on the lake.. Also heard that Yamaha has oil seal problems. So I'm hoping you all can help. I have never owned or...
  15. S

    250 hp motors

    Looking for input from anyone that has information on the pros or cons on Mercury and Yamaha motors. I boat on Lake Cumberland. I've heard that service for Yamaha is hard to find on the lake.. Also heard that Yamaha has oil seal problems. So I'm hoping you all can help. I have never owned or...
Top