2000 Bennington Wiring Information Needed

[Sly&Karen_16301]

I recently purchased a 2000 Bennington 2200FS with a 2000 Johnson 10 HP outboard without PTT. This boat was wired using MWS wiring.Boat also has wired trim guage and what appears to be motor monitoring indicators. I am looking to upgrade to a 1992 2 stroke 70 HP Evinrude with PTT. My Evinrude motor uses a cable with the obsolete red amphenol connector and an additional cable for monitoring. I want to be able to purchase Deutch connectors and modify my Evinrude cable to be able to plug into the boat wiring. I would be of great benefit if I had a schematic of the boat wiring so that I could complete this task. Also, I am unsure if the installed remote controller would be compatible between my two motors. Anybody know where I can get schematics for my pontoon boat?
Thanks!

 

[Link]

Sly, look at the thread titled Technical Stuff, the top thread has wiring info. Good luck with your project