2015 18 SLX Trim issue

Richcat

New Member
Messages
3
Reaction score
0
Looking for wiring diagram for boat( Complete) to include throttle trim switch....

While using boat went to trim down and all was well, but later on felt motor was down to far and switch on throttle would not trim up and gauge said full up. Will trim both ways with motor trim switch ( Yamaha 20 hp ) . Could use some help with a good wiring diagram so I can trouble shoot.
 
I had the same issue on my former Benny. Turned out to be a broken wire in the throttle handle. I unscrewed the trim piece on the handle and found 3 wires. I deduced one was ground, one was up and the last was down. Gently tugged on the wires and the one controlling down motion had broken coming out of the console. I simply spliced in a short piece of wire and all was well again.
 
Back
Top