Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the forum Mcar! Just get a good local welder to weld an aluminum bracket on to the back of your toon. We had a splash guard that had about half of the weld separating/cracked and a welder fixed it right up. Cost was $20.Only one of my toons has a transducer bracket. Has anyone added (welded) a transducer bracket to their toon? I'd like to add underwater lights and mount them to the transducer bracket on each toon, but only have one bracket.
I thought it would be just that simple. Thank You for the reply.Only one of my toons has a transducer bracket. Has anyone added (welded) a transducer bracket to their toon? I'd like to add underwater lights and mount them to the transducer bracket on each toon, but only have one bracket.
My neighbor recently had this same work performed on his Bennington. Ensure that the welder understands he can't simply weld to the toon without opening it up, otherwise it may burst.
My neighbor recently had this same work performed on his Bennington. Ensure that the welder understands he can't simply weld to the toon without opening it up, otherwise it may burst.
The small stitch welds and that large chamber, I doubt you’d ever heat that up to that extent, but there should be a bung on top of the toon with a threaded plug.
None of them are unreachable. Some more difficult that others.That's what I would have thought. Unfortunately the threaded plug on top of the rear compartment was unreachable on my friend's Benny.