All Three Panel Gauges Dead?

[Tooncrazy]

My 2015 2275 GCW Fuel, Tachometer and Trim gauges are all dead. Everything else electrical is working ok.

I don't see any loose or toasted wires behind the panel.

Is there a master fuse somewhere that might be the problem?

Can anyone give me some tips on what to look for to fix the problem?

Thank you.

 

[Jack M]

Did you try the breakers ?
Do you have a Power distribution panel ?

 

[Tooncrazy]

All the little black round breakers on the console seem ok. I don't have a power distribution panel.

Thanks

 

[Tooncrazy]

Does anyone here have a schematic for a 2015 2275 GCW?

 

[Tooncrazy]

I located the schematic for my boat. It shows a 10 amp fuse between the ignition switch and the instrument cluster. I can't find this fuse. Does anyone here know where it is? Is there a fuse block somewhere behind the instrument cluster?

Thanks

 

[JohnL]

I know this thread is a year old, but did you ever find that 10 Amp fuse? Went to take the Benny out today and all 3 gauges plus the hour meter were not working.

 

[Rickey C]

I'm having the same problem any answers on that 10 amp fuse I cant find it anywhere.

 

[Rickey C]

I found the fuse, it was a single in line fuse holder zip-tied to the wire harness near the ignition switch inside steering console.

 

[Matthew Doman]

Any follow up on this? Same problem here, fuse socket looks poor. Did fuse replacement help?

 

[JohnL]

Yes, replaced the fuse and gauges came back to life.