Ralph King
New Member
- Messages
- 2
- Reaction score
- 2
Bought my first NEW pontoon boat last year. Living on a pond the water stains are kind of bad. Went to my local marina this week and was told to use On&Off which will get 90% of the muck off, then apply Toon-Brite for the rest.
Used an airless sprayer to uniformly cover the pontoons with On&Off. The marina was right. 90% of the muck was gone, looked great. I then did the same thing with the Toon-Brite. That was a BIG mistake.
Not sure what to do. I called the marina where I purchased the boat and they said it was treated with Sharkhide at the factory. They suggest I use a lacquer thinner to remove everything and start over. I tried lacquer thinner and even acetone on the underside but did nothing, at all, even to the areas I did not clean.
Not sure how to get rid of this blotchy problem.
Any Ideas?
Used an airless sprayer to uniformly cover the pontoons with On&Off. The marina was right. 90% of the muck was gone, looked great. I then did the same thing with the Toon-Brite. That was a BIG mistake.
Not sure what to do. I called the marina where I purchased the boat and they said it was treated with Sharkhide at the factory. They suggest I use a lacquer thinner to remove everything and start over. I tried lacquer thinner and even acetone on the underside but did nothing, at all, even to the areas I did not clean.
Not sure how to get rid of this blotchy problem.
Any Ideas?
