Trailer bunk not touching

[Mark Tannreuther]

The bunk for the center toon is not touching in the far-back. It makes contact at the front of the bunk which is only about 1/2 way up the toon but the back has about 1-inch space. Is this intentional or do I need to adjust the support bracket so it makes contact throughout the length of the bunk? I am thinking I need to adjust.

 

[cwag911]

They all should make contact with the tube.

 

[adkboater]

Adjust the bunks for equal pressure across all three.

 

[Mark Tannreuther]

Okay, will do. Thanks