Weber Q series grill mount?

royal4

Well-Known Member
Messages
291
Reaction score
224
Location
Jordan Lake, NC
how and where are you going to store the grill and stand.  Some others have come up with some pretty good setups, perhaps they would be kind enough to repost or place a link here
 
I hope we get some pictures of setups.  Ive been thinking of the same thing but can't really come up with a good solution for a GCW.  I don't want the post mount for the swim step.
 
There is a vlock system for mounting to the rails.  I think if you go to bcpnicks gallery he documented his set up
 
/monthly_2017_03/large.IMG_20160706_114307226.jpg.b603b086e24493865a066cd7ec7e9bd0.jpg/monthly_2017_03/large.IMG_20160706_115250470_TOP.jpg.edade1fd11f70feb42638671f2207d15.jpg/monthly_2017_03/large.IMG_20160706_114317078.jpg.b08d55aefe33db550ed85e6ec772e8f3.jpg/monthly_2017_03/large.IMG_20160706_114329896.jpg.fd22e43616e89dabc7480d31416a0eaa.jpg/monthly_2017_03/large.IMG_20160706_114849012.jpg.f24b2e9992866e5bbb08e855d63d2011.jpg/monthly_2017_03/large.IMG_20160706_114307226.jpg.3660f20d9b98f43cd50e6d1ec22a7b8c.jpg
 
Posted pics of what I came up with... couldn't figure out how to insert comment with pictures.. had a hard time just figuring out how to  include pictures... learning....
 
Looks nice. Any issues with grease splatter on vinyl?


Just type your comments in post, then attach photos like you did in your post above. 
 
re: grease -- nope... I cut down the post so the top of the grill (when closed)  is barely above the seat top. With the extended deck it's pretty far from the seats. I do get a little splatter on the ski bar and/or engine cover but it's no big deal to just wipe them down from time to time.  I leave it mounted most of the season. The 2 sides shelfs fold in and I secure the top from opening with a bungy while underway.
 
Are the legs secured to the white board via under mount screws?
 
yes, the white board is a 1/2" 15"x20" plastic cutting board.  I had to add 2 strips of  aluminum angle iron (front and back) as the cutting board wasn't quite supportive enough. I have 4 small ss bolts that go through the angle iron/cutting board/grill leg to secure it. If anyone is interested I could also take a pic of the bottom so you can see the results.
 
Nice piece of meat!!!
 
I did something similar, different table and grill, and I put my mount out towards the outer corner, standard deck.
 
Nice piece of meat!!!

Yeah,,,after installing it I had to go out immediately and grill something!!!   That was a treat to myself for a job well done .... and it wasn't even a sunny day.
 
Looks like what we bought for Saturday. Are you guys still coming over?

Of course! I'll text or e mail you tomorrow........
 
I saw at the boat show this year a pedestal mount for the grill that had a suction type mount to the deck. Sorry I didn't snap a photo and have been unable to find on the inter-web. If anyone has a link to the pedestal suction mount please share. 


Cheers, 
 
That still isn't suction mount.  Agree with SemperFi don't think any suction would work, especially when dealing with a hot grill
 
My dealer has installed many of the mounts I have the link for above. They use them for tables, grills, etc ..... 
 
Back
Top