CLDave's latest activity
-
CLDave replied to the thread Surprise from Bennington in the Mail.I DEMAND MY BENNINGTON SWAG! (congrats on the haul!) -
CLDave replied to the thread How do I remove the upholstery fabric?.I'm pretty sure the material is stapled on. Take some photos and post here and/or scour YouTube for examples of upholstery removal for...
-
A good lithium car jump starter is good to keep on board in case you run your own battery down at the sandbar or come across someone on...
-
CLDave replied to the thread Adding SIMRAD GO7 to replace 3 gauge layout on 21 SL.I'd imagine a Simrad would be a factory option for any 2021, so you might luck out and get a pre-cut panel that will pop right in (if...
-
I lovee we my clips. I can unhook them quicker than snaps and don’t worry about tearing one out. 5 years, no issues. Note, if it takes...
-
CLDave replied to the thread Electric version, weight distribution issues.I had a similar issue on my 2275 RCW - it's mostly a problem with twin-toons vs tritoons - in your case made worse by being so short. My...
-
CLDave replied to the thread Better late than never.A thought: since you won't be in the water anyway, now is the perfect time to apply Sharkhide if you haven't. It applies better in...
-
CLDave replied to the thread Engine Quit, would restart after 15 minutes but stall again with any speed - Solution Found & Misc:.The power steering issue is a common one - running both batteries appears to almost universally fix. Another reason to run 1+2 while...
-
CLDave replied to the thread No drill 4 rod holder horizontal storage.Something like this mounted with automotive adhesive tape might work:
-
-
CLDave replied to the thread Source for Boat Covers.It'll probably be cheapest and best to go to your local canvas shop and have it made. You might have luck at greatlakesskipper.com, but...
-
Went with the Garmin striker 4. The connections are compatible and is a near fit. Just had to make some small modifications on dash
-
I finally took some time to watch some youtube videos and I was able to create my own home screen showing speed, water temp, voltage...
-
Thanks for all of the suggestions. The simple one seemed to be the best and I quickly roughed it out. I have a fiberglass 6' bicycle...
-
CLDave replied to the thread THE COUNTDOWN BEGINS.I'm usually back in by mid/late April depending on weather in MN - and always out by mid-October.
-
CLDave replied to the thread Steps/Ladders for elderly.I have a 3-step aluminum Step Ladder for this. (Dad joke alert: I never knew my real ladder.)
