Recent content by GarySWI

Please clarify. Is the black knob loose on the bolt head that's visible in your picture? If that's the case, can you get a nut driver or socket in the hole in the knob to get the bolt out? If not, I would try applying super glue into the hole of the knob. This might secure the bolt enough to...

Yes, I think you're on the right track. I would call New Wire Marine. They deal with this stuff every day. I would offer to send pictures to them if needed.

As I suggested, did you take out the switch and look for a part number?

If you take the switch out there is probably a part number on it. It's probably made by Carling. Then check with New Wire Marine or bring the switch to your dealer to get a direct match. Remember to take several pictures from different angles before disconnecting any wires so you can get the...

Contact a dealer and let them know that you are the warranty holder

Is your boat under warranty?

Don't get too carried away. Too much light destroys your night vision, except for red.

I wonder if the bezel around the switch is threaded and unscrews?

Bad in SE Wisconsin. On our small lake there is a tiny island about 200 yards off the southern shore. Today the smoke was so thick you could barely see the island as I drove past.

I don't think that disabling a safety feature is ever a good idea.

I would look at raising the canopy. Certainly easier than cutting up your bimini frame. No way would I do that.

I have a 2026 SSR with a 90 HP Yamaha motor. I live on a canal that connects to our lake. It's a dead end canal and I live near the end. Unfortunately, the surface of our canal has a bad duckweed problem, sometimes covering the entire surface across its 50 foot wide width. The city does a...

Lolol...I basically said the same thing while you were posting..

Since you have one of the old ones to copy, look online for someone to 3D print what you need.

Yes...I need to talk to the dealer again in the morning