Recent content by Kenai

Tried lowering it about an 3/4 of an inch. Still blanks out when you get at about 15 to 18mph. Also tried playing with the angle and that didn't work either. I talked to the dealer that services my boat and he said you will never get it fixed. That is the nature of these pontoons with a...

Thanks Michiman. I am going to try lowering it. We are on Lake Mitchell, Cadillac area. Not sure if you are familiar with the lake but it is a pan lake. Very shallow as you get close to shore. Drop offs are about 150 feet from the shoreline. Also there are some real shallow spots(like 3...

Thanks Illinois Ave. We are on a pan shape lake so the depth is varies quite a bit so we would be on and off the throttle quite a bit. I have been using the chart feature on my Simrad which surprisingly is very accurate.

Thanks. I played with adjusting the angle but it still was dropping the depth readout. I think I will look into the bracket idea and lowering it to see if that helps.

I lose my depth readout after I reach 15mph. I have played around with the angle of the transducer but still goes out. I have read where it has to do with where it is mounted and inability of having it in "clean water". Has anyone heard of a fix? Is there away to maybe lowering it? Would...

I know there are delays. I ordered a Max Lift in early March for delivery in May and it showed up finally on July 1st. They said that it was due to COVID. They couldn't get welders and parts.