Recent content by oldredm3

thanks gang. BTW the FB part in the rear is WOOD. not FG. When replacing the speakers I found this. Also my dealer is paying a local guy to lower the engine. Its got one more hole to go. he says its not getting out of the water enough. that one hole lower will lower it like 1/2 inch. I have had...

Hey guys, here is my issue. I have a new GSRFB with a F300. Max speed is 40.5 mph at just barely above 6k rpm and pretty much just over 50% trim. This is regardless of any amount of fuel or people. My prop is SWS 15- 15 3/4 (think its 15 3/4) 2013 GSR 2550 with a F250 on it. The old boat is the...

Im about to order one of the above and have a couple of questions. Looking at Black on Black with one of the tan interiors and a 250 Vmax. On the black out package -the anodized rails. Being black do they get so hot that its unbearable? Black Painted Panels, I assume they are high gloss right...

This is why you tie it off from the aft cleats at a 45ish degree angle to a tree or something.  Chris Sold my bennie for what i paid for it.

Bulldog can jump in here to. First your not going to get huge thump with a 500w amp. Im running 1100-1200 Polk @1 ohm. that thumps. Also from what i have read don't use a crossover in the head unit and the Amps. One or the other. I set the frqs at the amp. Suspect your Sony is a 2 Volt pre out...

Great Pics! Looks like that works. Where i go @ TableRock Lake SW Mo they have loose rocks. we have to use only specific areas that have the smallest amount. Typicaly the wife jumps off before we beach and clears the larger ones. Then lays the mats out. No real sand on my lake :-(

Mine are like 4'x4' with a bunch of holes in it. The holes help it sink. Your full mat would be a lot heavier because its solid. My Wife can pick ours up whole.  I will try to get pics when i go to the lake second week of Sept and report back... Boat Safely!

Ok, so you used a different mat than i did. I used the ones that are from Lowes and about same cost but have a lot of holes in them, My only concern with what you have is the width. I use all of mine especially on the 32" center toon... Let us know how this works out for you and if possible...

So how many of yall going to be hooking up at the Rock? Not sure i can hang with yall rich Bennington owners. LOL JK - I will be in the area just not the day you all ar hooking up... I camp at Mill Creek and will be there from like the 1st through the 12th... I have a bright red 2013 GSR...

I will do this at some point.... that way i can so how far i was away... i can do both the boat and the Motorhome... Next is a cover for the Motorcycle.... LOL Love the idea of the Machine tuning.... thanks!

Crutchfield has some good articles on adjustments with out a machine (google it - probably a gazillion articles on it). Thats how i did mine.. it gets it close. Got to understand whats what on the controls on the amp/s I would love to try the Machine myself....

LMAO, " Far from an Audiophile?" you are definatly one and one with more experience than myself.... BTW My 72 year old cousin still builds Stock car race engines that win and has a boosted Seadoo that rins 70MPH at ahalf throtle and a Redline that runs 127MPH.... So its nice to have a...

I love Talking Audio! I consider myself a low end Audiophile that likes superior quality. with out spending $10K (like some car and boat systems) When ordering my 2013 2550 GSR i ordered with out ANY head unit or speakers! here is my thoughts. (everyone has an opinion right?) ( Kicker and the...

you all that beach it in the sand got it easy! I am at table rock Lake which is rocky and i beach and dont have ANY scratches or marks on the 3 hulls at all! LOL I use Big Horse Mats that are about 3/4 " thich with holes so it sinks easy enough.... they are avalible from Some Home Depots or...