Recent content by OLDTIMER

I am in a seasonal climate as well - gets well below freezing during the winter. My Touchless cover is installed in my boathouse under a roof. I leave my boat under the cover year round. I believe removing the vinyl would be a tough job. There are loads of these covers around here and none are...

I have a 2012 RCW with a Yamaha 225 under a Touchless cover that is 28 feet long. The cover was installed about 3 years ago for another pontoon that was slightly longer than our RCW. It is plenty long for the RCW. The Touchless boat cover is the best thing we ever purchased for our boating. Our...

I have a 2012 Yamaha 225hp with digital guages, throttle and shift. I have no beep or buzz when I first turn the switch on or before I start the motor. I had a 2008 Honda 225hp on my previous boat which sounded 3 beeps before you were to start the engine.

Clamp on and it is doing fine. I ordered it before my new Bennington arrived. After putting the clamp on mirror on my pontoon, I think the bolt on would work fine if you don't mind drilling the holes.

Try www.ptm.edge.com. The two pontoon mirrors they have are not cheap but are nice. I have one on my new Bennington. I first saw these as an option that Manitou offers on their pontoons.

I filled the tank for the first time today in my 2012 RCW 2275 with ESP and a 55 gallons center tube fuel tank. It took 40 gallons and did not spil out or turn off until full.

For the 2012 RCW with stern lounges, the location of the master switch requires raising the seat of one of the lounges and then removing a second cover over the batteries (which is not too easy to reinstall). There has to be a more convenient location.