Recent content by Scott1953

I meant to follow up with the cause of my boats electric problems sooner, guess that I got busy and forgot: After testing what circuits I could and reaching the limits of my understanding, I took the boat to the dealership, it turned out to be a relay. The cost of repair was reasonable in my...

Nothing evident, closer inspection tomorrow

Most seem okay, tomorrow’s project will be to pull the switch panels and check further.

Thanks Jack, I've pushed each connector, they all seem tight. I tested the circuit breakers with the multi-tester (ohms setting) they all checked out.

Sorry if I hijacked the thread, but it seemed like a good title for my problem. So, I'm kinda jumping into this with a similar problem of my own. I have a 2016, 20SL, that I bought earlier this summer. It was a consignment boat at a local dealer. Really loving the boat! Everything has been...

This is what I got, there's lots of choices online. I did have to drill the top of the gas can for the (included) vent.

I tried an old style fill tube on my gas can, slid it in as far as I could go and emptied the 5 gallon can in just a few minutes. Much better than the "safety" nozzle. I think that I should still check out the vent hose but at least for now I can get gas into the boat!

Thanks DVW. I’ll check these suggestions out this week. I’ll let you know what I find.

Thanks DVW, that sounds like the same problem I'm having, even with the 5 gallon gas can, I can only trickle the gas in. I'm attaching some photos, looks like if there was a "flapper" in the fuel fill, it's been removed. All visible lines look fine to me. I do have a new longer/flexible nozzle...

Since I usually use a 5 gallon can to fill, I ordered a plain flexible nozzle for my gas can. The "safety" nozzle has long been an irritation (at best) and is over due for an old style replacement! Having said that, it was also slow to fill at the pump. I had to barely pull the handle, any more...

Well, first mention I've found...dealership item? Actually, when I look in I don't see a "flapper valve"...

Just Bob, Could you share the details of the fix and possibly how you fixed it? I just bought my 2016 a couple of weeks ago and am having the same problem. Thanks in advance!