Recent content by Stephen Graham

Thanks I'll try that

7.5"×11"×10" trash can....or close to. It's something small

10" tall x 7 5/8" × 11" + or -. I have found several that are close,but it appears this molded hole is made for something specific. Bennington doesn't answer emails about trash cans.

Way to big

Search for a number?

2020 S port couch. Under seat obviously made for garbage can...but what can fits?

Call Powertech. They have proped out several boats correctly for me over the years.

Call Protech. Give them your stats. They will get you the right prop.

Powertech has propped out several shall we say "troublesome" boats over the years. Need to know what pitch your running and GPS speed at WOT to even get started. It may take 1 to 3 tries before you get the right prop.

"Michelle" at Powertech is the engineer that set me up with the SS prop I have on the boat. I took the boat around to the dealer by water yesterday. Was by myself. Full tank of gas. Windy, a little choppy. 5400RPM. Trim up 1/4 of the gauge. Per GPS 32/33 mph. Because of the wind and chop I...

When the boat was new, before the lifting strakes. Basic boat. 20S cruise model. I added hydraulic steering, the strakes, duel batteries with a switch. SS prop. Otherwise as it came from the factory. I'm 230lbs. Can ski behind this boat. Tube 2 kids with 4 or 5 people in the boat. Of course with...

Regular toons. 26" I believe

My understanding is a 90hp CT has a 150hp lower unit and gear box. Giving you a much wider range of prop pitch and size. I have also read lifting strakes won't help till your up to 150hp or more. I've read alot about pontoon boats in the last 5 years. So far I'm still not convinced it's a...

Command Thrust

20S with 2 toons, lifting strakes. 90hp CT, 3 blade SS 15 pitch. We consistently get 32 to 34mph. Water and weather just right we have seen 37mph.