Recent content by thosutt

Wondering if you can tell me where you had your eisenglass fabricated? We have an older Benny RL22. Wondering if Beenington or if you are familiar with Tumacs? Wondering if Tumacs would make one since they fabricate new OEM Covers based on your VIN. Thanks for any referrals. St. Louis MO

Hey there, thanks so much found the manual. Good to know about the speed of the boat. Figured that might be the issue, especially with the river bottom constantly changing and the range of the sonar. The unit seems to work as it should otherwise considering it is original to my 2008 RLi. Sure...

Is there an online manual for this model you show? We boat primarily on the river, and I am mostly interested in DEPTH readings during low river periods. I guess it should be fairly self explanatory, yet it doesn't seem to read correctly if the boating is moving. It locks into the depth at the...

Thanks for the information. Will post after spare installed on trailer. ;):)

Wanting to mount my spare trailer tire on my Bennington 2275 Tritoon trailer to get it out of my storage shed. Can you recommend a universal bracket and where to mount it. Would it have to be welded on or do these mount with U-Bolts to the frme usually?

Thanks for the reply.

Hi....have an older Benny Tritoon and the stern light won't stay up. Think the previous owner flew a flag from it and stripped the bracket tension or broke the teeth. Dealer says they have a replacment bracket $35 and a new LED light pole for $99. Can you suggest anything that I can buy...

Buying used 2275RL. Has one battery, want to add one = 1 cranking and 1 for house. Do you recommend A Blue Sea Add-A Battery set up? Rookie here. Previous owner's son attempted to charge the 1 battery and burned up the wiring harness ( which has been replaced by qualified marine service...

Hi, I am a new Bennington owner of a used 2008 2275RL. The boat came equipped with a pop up privacy changing frame, but the original owner has no idea where the original canvas tent went. Do you have any idea how, where I could get one made. Do you think Tumacs or Veada might fabricate one...

Thanks for the tip. I looked inside the seat and it looks like it is bolted to the deck floor. It also appears that the only way to get the bolts out of the bottom of the seat is to go from underneath. There isn't enough room to get between the toon and the bolt to get the seat out I need...

Hi, Wondering if you have any idea how to remove the Left Arm Bench Port Seat for reupholstery on this 2008 Bennington 2275RL? I am told by Veada that this piece of bolster is all one piece and entire arm cover must be replaced. Do you thin the corner is one piece and the bench portion is a...