Bennington Logo

[Oldeck]

Does anyone have the Bennington logo and text in a dxf or jpg file? I am trying to 3D print a few things for my pontoon and want to incorporate the log and/or name into the design.

 

[Link]

Does this help?

 

[Oldeck]

Thanks, I am a little rusty on CAD, but I will try it.

 

[cwag911]

Thanks, I am a little rusty on CAD, but I will try it.

I sent you a private message.

 

[prd2hnt]

I stumbled across this. Don't know if it helps or you have already done what you were going to do.

Chrome_benn_logo

• prd2hnt
• Jan 19, 2018

 

[Oldeck]

Thanks, I made a bimini rail cover. I have to go through a tight bridge to get to the main lake and don't want to scratch the bimini rails. I printed this using ABS plastic, it looks great and should work great. Thanks for the logos.

 

[cwag911]

That is awesome!

 

[Vikingstaff]

That is very sharp!

 

[BigKahuna]

Bimini rail cover? When it's opened or closed???

 

[Oldeck]

I have to put the bimini all the way down to get under a very low bridge/tunnel, with not much room on either side. The rails in the fully down position can still hit the sides of the tunnel if you are not careful. This is why I made these. It's definitely a special case just for me. With over a foot of ice on the lake, it will be a long time before I can test these out I will post a picture in the Spring.

 

[Oldeck]

The Red arrow points to where the rail cover will go. The second picture is the tunnel I have to go through to get to the lake.....

 

[lakeliving]

Tight squeeze for sure! A+ on creating a solution to the problem.

 

[BigKahuna]

I understand now.......Thanks.

Lake Gaston on the Virginia/NC line had a bunch of tunnels like that in order to get to some parts of the lake. We had a bowrider at the time and we were a nervous wreck!

 

[Oldeck]

Tight squeeze for sure! A+ on creating a solution to the problem.

I am 6' and can stand up going through, if you are 6'2", you would bump your head

 

[Michiman]

Just better hope the wind is not blowing too hard. Yikes!

 

[lakeliving]

I am 6' and can stand up going through, if you are 6'2", you would bump your head

I'm 6'5" so I'd be getting more than a bump....more like scalped!

 

[gnc1017]

Those are sharp. You might need to make a rail cover cover