My dealer just replaced my trim/voltage gauge on my 2020 G Series pontoon. The trim display works the opposite from the direction of movement. If you are lowering the engine the trim display shows it rising, when raising the engine the gauge shows it lowering. Seems like the wires are just reversed on the gauge. Do these gauges just pull/pop out allowing me to reverse the wires or must it be accessed from inside the console? My dealer will come out, but would not be able to until after Memorial Day. I truly believe the two wires have been installed in reverse and should be a very easy repair. Please advise how I access the rear of this gauge. Thank You!
Dash Gauges 2020 G Series
- Thread starter lakevue
- Start date
Jack M
Moderator
You should be able to access the wiring on the gage from inside of your helm .
Jack M
Moderator
I have never had to pull a gage ,but the wires were accessible on mine ,If you do want to swap the connections
lakeliving
Well-Known Member
Mine is a combo gauge and only goes one way.