Back to the main site

Flushing problem

Stowaway

Stowaway

Well-Known Member
Messages
48
Reaction score
2
Location
Delaware
I have an E-TEC 115 on my (new to me) '08 2275 GL. I installed a quick flush kit on the engine, but something is preventing water from getting into the engine. Installation instructions says slide valve replaces "flush port plug". I'm very much a non-tech guy. Is the flush port plug something that a novice could remove?
 
Stowaway said:
I have an E-TEC 115 on my (new to me) '08 2275 GL. I installed a quick flush kit on the engine, but something is preventing water from getting into the engine. Installation instructions says slide valve replaces "flush port plug". I'm very much a non-tech guy. Is the flush port plug something that a novice could remove?
Click to expand...
Check out this link. You'll find info on the flushing port for your engine.............pages 12 and 36..........

http://dusac.org/sites/default/files/pdfs/EvinrudeEtec115.pdf
 
BigKahuna said:
Check out this link. You'll find info on the flushing port for your engine.............pages 12 and 36..........

http://dusac.org/sites/default/files/pdfs/EvinrudeEtec115.pdf
Click to expand...
Thanks very much for the feedback. I've attached hose to the flush port/telltale as instructed in manual and, although water pressure is very good, no water is coming out of lower end unit. Taking boat back to dealer for assistance. BTW, I've boated on Lake Anna and it is indeed beautiful.
 
You must log in or register to reply here.
Back
Top