Removal of black skirt on top of toons and below deck?

steve3sport

Member
Messages
5
Reaction score
0
I am planning to install lights on stern mounts and want to run wires to helm, seem the easiest way would be remove the black skirt around the boat and run the wires there, is this doable or advisable? 2016 2575 QCW
 
I am planning to install lights on stern mounts and want to run wires to helm, seem the easiest way would be remove the black skirt around the boat and run the wires there, is this doable or advisable? 2016 2575 QCW
I removed mine to get to the seat base bolts. Didn’t seem like a big deal just definitely want a second set of hands to eliminate any catastrophic events!
 
Taking those off will help running the wires.
 
3/8 drive ratchet 9/16 socket and 9/16 wrench.
Easy on the peasy.
 
I used an impact gun(lazy) but hand tools will do just fine. Leave on in each end as that panel is not terribly heavy but is long and awkward, same when you go to hang it.
 
Back
Top