Recent content by CastingCouch

I bought a Digger for my 2574 GL and I didn't have very good luck with it. The lake I'm on ( Winnebago ) is a large body of water with a sand/mud bottom and I could never get it to hold even with 100' of line out. I use it as a stern anchor now or my "lunch hook" and went with a Rocna plow...

Hello, I have a 2009 2575 Gli, one of my seats is starting to split along a seam. I'm wondering if this can be repaired or if I need to replace the seat cover?

Hello, I have a 2009 2575 GL and I'm interested in adding a forward bimini top to my boat. I'd like to know if bimini tops are still available for this year or if this would have to be a custom job? Thanks in advance, Dave

According to Lowrance you should not install your transducer within 1.3 meters of the left side (down stroke side) of the centerline. I just measured my boat and if you install your transducer to the extreme left side of the provided mount you'd be fine. I know this is for Lowrance but I'd be...

Thank you for the responses. I don't have any problems mounting it, the real question is where, as in how deep, I've read everything I could find and they all say avoid turbulant water but with a weld at the trailing edge of the pontoon, does that cause problems for the transducer? Maybe I'm...

Hello, I'm going to install a Lowrance Elite7 TI sonar on a 2575 GL. Has anyone of you mounted this sonar with it's huge transducer onto your pontoons and also do you have any suggestions of things to do and not do for the install? I'm thinking it should be pretty straight forward but usually...

Does Bennington sell an underskin kit or is one available aftermarket? I thinking of going to a local metals shop to see if I could purchase some .06 aluminum skins and have them sheared and bent. However if Bennington had something pre made I'd rather go that route.

Hello, I have a question, I recently bought a 2009 2574 GLi (used of course) and I see that the carpet is getting wet from the underside about 6 feet back from the bow of the boat. From the pattern of the wet spot it seems to start in the middle of the deck. I can only assume it's from a loose...