Recent content by lcbl75771

Should I stay with an aluminum and go up in pitch or stay with what I have? Maybe go with a 14 instead of 13 pitch? Just trying to get an overall idea of what diameter and pitch others are using.

I have a 2075GS with a Yamaha 90hp. The original prop is an aluminum 13 5/8 X 13-K. It runs good so I figured a stainless would do good. Far from it. the prop it terrible. It is a Yamaha pontoon prop and was shown to be the best for a pontoon boat. I am just going to buy a new aluminum unless...

Thanks, looks like both bulletins are using a 14 pitch prop. I will check the cavitation plate next time out. Should changing to a 14 pitch increase speed and RPM?

Ok, here are the numbers from this weekend. Me only, WOT, 5500-5600 RPM, 23-24 MPH. 6 adults. 5200-5300 RPM, 19-20 MPH. As originally posted, I was running the aluminum 13 5/8 x 13 prop. With these numbers, what prop should I be using. I am looking into getting a stainless, that's why I want to...

Ok do I run it WOT with just me or WOT with family to get the speed?

Don't know speed, WOT is 5700-5800 rpm

I have a 2007 2075GS with a Yamaha 90TLR. The aluminum prop that came on the motor is a 13 5/8 x 13 - K. Anyone have a recommendations? I think another 13P, but 13 3/4 or 14 diameter. What brand are you running?

I have a Bennington 2075 with a 90-2 stroke. The current prop is a 13 5/8 x 13. Would I go with the same size in a stainless? Yamaha has a Pontoon Performance prop 14"x13. Any one run this set-up? What is your opinion? Thanks

While at the lake yesterday I noticed at the front on the underside of the decking, where the harness is for the navigation and docking lights, there is a plug that has nothing plugged into it. What would this be used for? My guess is that it would be for an extra option of some sort that my...