rbtnt's latest activity

  • R
    You can put Vaseline on the threads to protect from bleach or Marine 31. Easy to remove after cleaning. Before Marine 31 I would soak...
  • R
    rbtnt replied to the thread SIMRAD GO 7 Sun Cover.
    A local sign shop gave me a sample piece of static cling to try. The only colors they have are white and clear. It looks like it will...
    • Simrad Sample Static Cling Cover.jpg
  • R
    rbtnt replied to the thread SIMRAD GO 7 Sun Cover.
    Would a white static cling sign/decal work?
  • R
    rbtnt replied to the thread SIMRAD GO 7 Sun Cover.
    It will not fit. Even if I trimmed the top edge to fit under the dash shade, the Simrad cover is too wide and too thick to fit in the...
    • Simrad Cover Part Number.jpg
    • Simrad Cover.jpg
  • R
    rbtnt replied to the thread SIMRAD GO 7 Sun Cover.
    My dash is like yours. I just ordered another cover from Amazon to see if it will. The first one was too big. I think if I get the...
  • R
    Anyone know where to get the bimini frame mounted switch that is used for the blue LED's mounted on the underside of the bimini top?
  • R
    rbtnt replied to the thread Water Slamming up under boat.
    Here's a photo of what I had added to the flat spots that are about 3'-4' front the stern.
    • Engine Pod Addition.jpg
  • R
    Did you replace the solenoid on the starter or the relay? If you replaced the solenoid on the starter the problem is probably the relay.
  • R
    You should be able to raise the motor with the Rev4 which could change your numbers.
  • R
    rbtnt replied to the thread Bunk Replacement.
    You can also use composite decking on top of your 2X4s'. In my area, Menards has 20' and the other big box stores only carried up to 16'.
  • R
    Here is a link to bolts - https://www.mcmaster.com/nuts/screws-and-bolts/ The electrical connector is a snap plug. These might work...
  • R
    rbtnt replied to the thread Mercury outboard cleaning.
    I've had good luck with Hot Sauce water spot remover. The bass guys in my area swear by it. https://blingsauce.com/products/hot-sauce...
  • R
    rbtnt replied to the thread SIMRAD GO 7 Sun Cover.
    I have a flush mounted GO7 and did not get a cover. I tried a cover, but the the sun shield on the dash was too close to the GO7 to put on.
  • R
    rbtnt replied to the thread Motor capabilities and ECU flashes.
    Simon is not offering tunes and said they won't be offering them in the future.
  • R
    rbtnt replied to the thread water spray guard.
    After I put the Atlas jack plate on, the water was spraying forward 2' inside my center rear door when running between 20 & 30 MPH. I...
    • Splash Guard 1.jpg
    • Splash Guard 2.jpg
Top