Remediation's latest activity
-
Well...your post inspired me. I didn't need a fuse panel but I wanted the on/off switch, the acr and the circuit breaker for the house... -
Remediation replied to the thread Helm seat removal??.Snap lube works also. I use it on hinges and the snaps.
-
Remediation replied to the thread Helm seat removal??.On mine if you loosen the big black knob that tightens the swivel the seat will just pull up and off. The pedestal removal is a...
-
Remediation replied to the thread Modifying our boarding ladder.....Just had 10 ladies on the boat. Youngest is 65. They loved the new Lillypad ladder. Wanted to know why we did not get it earlier...
-
Remediation replied to the thread Paddle Wheel Speed Gauge 2010 2550 RCW.The speedometer on our 2008 has never worked.(It does say the boat is going 50MPH for the last 12 years we have had the boat) Once a...
-
Remediation replied to the thread Best Anchor.I release the arm because it will not fit under the seat squared. I sprayed the arm spring with dry lube because I did not want to...
-
Remediation replied to the thread Re-upholstery..My advice would be go to a recommended upholstery shop and get their advice on a repair. No fabric is going to match 6 year old seats...
-
Remediation replied to the thread Boat Curb Weight.You can go to a truck stop with a CAT scale and weigh the trailer.
-
Remediation replied to the thread Best way to clean carpet.What has worked for me is to wait for a rainy weekend and leave the cover off. The marine carpet absorbs a lot of water. A hose or...
-
Remediation replied to the thread Ordered my new 24MSB!.Really like the flooring!
-
Remediation replied to the thread All Accessory Switches Dead?.check for a small red wire that did not get hooked up to the batteries.
-
Remediation replied to the thread WOT going straight to 7k.Is it a 2 toon, 3 toon or elliptical toons?
-
Remediation replied to the thread WOT going straight to 7k.You have a very heavy boat with a heavy load and an 115HP engine. That engine is undersized for your setup. The high rpm could be from...
