I just got a new 21ssx and am wanting to set up my lift to accommodate it. My lift as 4 bunks as pictured below. Can I get buy with this or do I need to run new boards (2x6) connecting the bunks. The bunks will be about 12 ft apart on the lift. I did find Bennington's spec sheet for support points but cant imagine that working on a lift as the bunks would have to be 18 ft apart
Ok, Cant upload picture so will have to describe the bunk. Each of the four sets has 2 carpeted 2 x 6's 15 " long. that the tube sits on. Can I use it that way or will it work to remove the current boards and replace with a 12 to 14' 2x6 that connects the bunks together.
Thanks,
Scott.
Ok, Cant upload picture so will have to describe the bunk. Each of the four sets has 2 carpeted 2 x 6's 15 " long. that the tube sits on. Can I use it that way or will it work to remove the current boards and replace with a 12 to 14' 2x6 that connects the bunks together.
Thanks,
Scott.
