Welded Rings on Toons

[GWLK]

My boat is still under wraps, so I need a little help.  Would someone provide me with the I.D. (inside diameter) measurement of the welded rings on the toons?  There are welded rings on the bow (each one of the three toons) and stern (the two outer toons).  Not sure if bow and stern are the same diameter.

Thanks in advance, for the help. 

 

[ct0218]

I'll measure mine tomorrow AM. I just applied a second coat of Sharkhide today, and I wiped some inside the opening. Seems like they were about 1.5" to 1.75". It was tight with a couple fingers and the diaper.

 

[Bamaman]

I can tell you that outside 25" toons are 77" apart.  I would think 1.5" would be about right on the inside measurement.

 

[ct0218]

I just checked and they're smaller in diameter than I remembered...exactly a 1" hole in 1/2" aluminum stock

 

[GWLK]

CT0218, thanks for the info.