Recent content by Mike Frantz

  1. M

    transducer mount and speedometer wheel, and prop

    That would be great for me also, I'm still getting a spray staight up off the transducer and now off the wheel for the speedo. thanks.
  2. M

    transducer mount and speedometer wheel, and prop

    Thanks Bill for the responce, Yea, more speed would be great...although gaining 5 MPH would not be worth the effort. I should have gotten the 150 horse motor in the firat place I quess. But I love this toon. thanks.
  3. M

    transducer mount and speedometer wheel, and prop

    Thanks for the help guys, I'll mount them on the same bracket about a 1/4 inch below the toon. thanks again. Just one other question, if I go to a bigger prop and stay in the 5800 rpm range, could I get alittle more performance?
  4. M

    transducer mount and speedometer wheel, and prop

    Thank you or the RPM help, that takes alot of worry away, I'll leave it alone The instructions on the transducer and the speedo wheel, both say bracket even with the bottom with the units hanging below that, but if yours work that way, I'll give it a try. thanks for the help.
  5. M

    transducer mount and speedometer wheel, and prop

    Good morning everyone, I have basically three issues.....first, I mounted my fishfinder (Humminbird) tranducer on the bracket on the port toon. it is on the left side of this bracket, hangs down about an inch below the pontoon. when cruising the transducer throws up a rooster tail and gets the...
  6. M

    Prop size and water coming up thru floor

    Well we can rule out the live well thing, I don't have one. Also I noticed the other day when I had more people up front than usual, it really started coming up fast thru the floor. normally it starts out as a wet spot that progressively gets bigger, but this time it was the size of a football...
  7. M

    Prop size and water coming up thru floor

    thank you all for the quick responce. Apparently I can go to a 14 x 10 prop for a little help there. thank you. As far as the water coming up thru the deck, the plastic piece is in good shape, I will probably wait till the boating season is over to take it back up to the dealer. Can I just...
  8. M

    Prop size and water coming up thru floor

    Good afternoon, as you can see in the title and my number of posts, I'm new and I have two questions. I have a 2010 22SLi with the 90 horse ultra low emission motor, it has the H 14X11P prop it will run 5600 rpm all day, but I can't tell you the speed (yet, my wife bought me a fish finder...
Back
Top