mtudb24's latest activity

  • mtudb24
    mtudb24 reacted to Jack M's post in the thread Yamaha Prop for 21ssx pontoon with Like Like.
    Do you know the size of your current prop? I have a a suggested prop chart that Bennington provides to its dealers, your suggested size...
  • mtudb24
    mtudb24 reacted to SOPOPONTOON's post in the thread Yamaha Prop for 21ssx pontoon with Like Like.
    my dealer just suggested and put a 14 x 11 prop on my 70 hp Yamaha on a 20 foot pontoon. gets up to 20 mph at 6200 rpm WOT with 2...
  • mtudb24
    mtudb24 reacted to Buff's post in the thread LIST YOUR SPECS HERE with Like Like.
    23SSB 2025 SHO 200 14 1/2 - 14 38mph 6000
  • mtudb24
    mtudb24 reacted to SOPOPONTOON's post in the thread LIST YOUR SPECS HERE with Like Like.
    2018 Bennington SsX 20 25inch pontoons Yamaha F70LA 14 x 11 prop Get about 20 mph at 6200 rpm WOT with 2 adults and full gas tank
  • mtudb24
    mtudb24 reacted to SquareB's post in the thread Water in Toon with Wow Wow.
    Our 2025 , 27QXFBWAT2has a bilge pump in each toon, the same as the 2024QSBWAT2 that we got rid of. I could go on and on about how much...
  • mtudb24
    mtudb24 reacted to ABarbarian's post in the thread Water in Toon with Like Like.
    Last update- I dropped in the dealer today and talked to the sales mgr/gm. Explained everything and had pictures and 2 videos. He seemed...
  • mtudb24
    mtudb24 reacted to Vikingstaff's post in the thread Water in Toon with Like Like.
    FYI: The bilge pump you are referring to only pumps water out of the center pontoon storage compartment. Those are not water tight...
  • mtudb24
    mtudb24 reacted to Potomacbassin’'s post in the thread Water in Toon with Like Like.
    Good to hear you excised the demon! I may do the same with my rear toons. just seems to ride a little more aft-heavy these days after 6...
  • mtudb24
    mtudb24 reacted to ABarbarian's post in the thread Water in Toon with Like Like.
    3 gallons in the starboard nose cone. You could hear it if you rocked the boat side to side on the trailer
  • mtudb24
    mtudb24 reacted to ABarbarian's post in the thread Water in Toon with Like Like.
    I just got home from aluminum welding shop. We drained 3 gallons of water from the starboard nose cone area. Definitely not...
  • mtudb24
    mtudb24 reacted to SEMPERFI8387's post in the thread West Marine with Like Like.
    Sadly, I personally think the majority of companies that go through this process, eventually go into full bankruptcy. I think very few...
  • mtudb24
    mtudb24 replied to the thread Install Transducer and cable.
    My factory Garmin was also mounted on the port toon which is odd because you typically want them mounted to the starboard side due to...
  • mtudb24
    mtudb24 reacted to CherokeeBoater's post in the thread Install Transducer and cable with Like Like.
    2017 23RCW. I Replaced my old, original Garmin with a new larger screen which required a new transducer, so I made a blank to fill the...
  • mtudb24
    mtudb24 reacted to rcurran's post in the thread Install Transducer and cable with Like Like.
    I am ready to Install a Garmin Striker Fishfinder and would like some advice. Tell me what you think. I plan to mount the transducer...
  • mtudb24
    mtudb24 reacted to ABarbarian's post in the thread Water in Toon with Like Like.
    So that was a failed attempt - mostly. I was feeling good about it to. I was able to tie my shop vac into the vent for that section...
Back
Top