PartyBarge's latest activity
-
PartyBarge replied to the thread Volt Meter.Yes, do that. If you have a a separate volt meter use that to confirm the boat meter. If your batteries are of the lead/acid type, the... -
PartyBarge replied to the thread Volt Meter.Well...could be a couple things. Was the charging voltage high the entire time you had the motor running? It could be a regulator...
-
PartyBarge replied to the thread Seat pedestals (any Advice).It appears the first attempt will work just fine. Used 4.5" lengths of 2x6 pine. Those are through-bolted using the existing pedestal...
-
PartyBarge replied to the thread Seat pedestals (any Advice).It would help to know what your issue with the seat is. The main issue I fixed was a seat that offered poor forward visibility. I was...
-
PartyBarge replied to the thread 2022 sx23 Yamaha 200 speed."Ok, so we have the inline 4 cylinder, not sure of the gear ratio, we have a built in Simrad unit which seems accurate..I have a...
-
PartyBarge replied to the thread 2022 sx23 Yamaha 200 speed.OK, so it is VERY important to know if you have the 4-banger or the V-6 version AND what the overall gear ratio is! Note that Suzuki, in...
-
PartyBarge replied to the thread Modify a rail system from a 292 Formula to a 2027 27QXSBAWT2.I will be looking to do the same, maybe this year. Not sure if the best way to go for us is the V-boards or the metal cradles. The...
-
PartyBarge replied to the thread 22' M Swingback Assistive Power Steering.A couple things I haven't seen mentioned yet: the Seastar system will run about FIVE wheel turns from lock-to-lock and is pretty easy...
-
PartyBarge reacted to BigKahuna's post in the thread Blue Sky cover - has anyone tried one? with
Like.
Oh oh sand bags again!!! -
All this for probably a 12mm bolt holding the anode/trim tab under a rubber grommet and 15 seconds of adjusting. Dealer is a joke!! Glad...
-
PartyBarge replied to the thread Steering issues.Regret I did not see this post earlier. Not only is the tab set incorrectly, but that is not the style of tap on our F90. I understand...
-
A lot of talk and no resolution. This is how I see the original posts description. The problem is that at speed the boat steering wheel...
-
PartyBarge replied to the thread Tritoon Lifting strakes on a boat lift.Does the new pontoon have all 25" tubes? Although hard to get a good gauge, looks like the boards would only contact on the outside...
-
PartyBarge replied to the thread WOT Yamaha F150 rpm's.Well...so far that sounds perfect to me, in any event wait until you have more time on the boat particularly with a moderate to heavy...
-
PartyBarge replied to the thread West side of Burt Lake ,8/1/26.Hummm...Burt Lake rang a bell...then realized I went walleye fishing there in the mid-60's! Beautiful place, but a long trip from...