2275 GCW Helm Panel Cut Out For GPS-Is There Room?

Tooncrazy

Well-Known Member
Messages
281
Reaction score
27
Location
Tellico Lake, TN
I'm getting a 2015 2275 GCW. I have a Garmin GPSMAP 536s that I would like to flush mount in the raised helm panel. Does anyone here know if there is enough room, perhaps where the Echo 100 would normally go, it needs a 6 1/4"H X 6 3/4"W opening?

Thank you.
 
Last edited by a moderator:
Ordered this from my dealer for my 2014 2375 GCW will fit a 547 so it should fit yours i will have to drill 3 holes for the rocker switches. This is what they use on the g series that order the 50s from factory.IMG_1274 (1024x683).jpg
 
Ordered this from my dealer for my 2014 2375 GCW will fit a 547 so it should fit yours i will have to drill 3 holes for the rocker switches. This is what they use on the g series that order the 50s from factory.
attachicon.gif
IMG_1274 (1024x683).jpg
What exactly is the item in your above photo, is there any kind of part number with it? Do you have a elevated helm?

Thanks.
 
Last edited by a moderator:
Tag on back says 66712 but looking at the pics on boat builder they show the GCW with a different plate with the 50s installed from the factory on the 2015. I dont know what a elevated helm would have to do with it because it appears that the dash is the same. Best bet is contact your dealer they should be able to order the piece to fit your boat. No I dont have elevated helm.
 
Last edited by a moderator:
Back
Top