Accessing interior LED light wiring

Dewitt492

Member
Messages
6
Reaction score
0
I have a 2008 2275 qxi. The LED light mounted on the helm doesn't work and I'm suspecting that there is a loose wire / connector. I don't see how to access the wiring for this light unless I remove the panel which has some type of plastic clips. Has anyone removed these before and if so do you simply just pull out on the panel? I can't see the ends of some of the clips when I pull the seat back on the forward lounge seat (see attached pic).
 

Attachments

  • PXL_20220822_194412176.jpg
    PXL_20220822_194412176.jpg
    57.7 KB · Views: 29
  • PXL_20220822_194151056.jpg
    PXL_20220822_194151056.jpg
    88.5 KB · Views: 30

Dewitt492

Member
Messages
6
Reaction score
0
I have a 2008 2275 qxi. The LED light mounted on the helm doesn't work and I'm suspecting that there is a loose wire / connector. I don't see how to access the wiring for this light unless I remove the panel which has some type of plastic clips. Has anyone removed these before and if so do you simply just pull out on the panel? I can't see the ends of some of the clips when I pull the seat back on the forward lounge seat (see attached pic).
Anyone?
 

Seadoorxpguy

Active Member
Messages
30
Reaction score
40
Those black things are push clips that get installed from the other side. Pushing them out will not help you. All the wiring on the helm on my boat is behind a board that unscrews.
 
Top