Bimini frame mounting points - 2016 Bennington 24 SSRX

[ebg338]

Greetings, hoping someone can help me out with some measurements. Recently purchased a used OEM bimini (frame, top, hardware) off a 2016 Bennington 24 SSRX. Bimini is 8 1/2 ft wide and ~10 ft long. I'm going to add this to the front of my 2875 RLX. Problem is I'm not having luck getting info on the appropriate distance to mount the front and rear arm attachment points to the pontoon fencing. Anyone have info on the distance the front and rear mount points need to be from the center mount point of the bimini frame?

I've contacted Bennington multiple times - no response and have been searching the web with no luck.

Info would be greatly appreciated if someone has one and can give me the measurements!

Thanks much

 

[Pbakk]

I don’t have a measurement for you, but I would probably use some clamps and experiment different positions, viewing how it fits with the existing top, how level it is compared to railing, and how it fits when closed as a start before drilling.

 

[ebg338]

Yup, was planning to. Figured having the measurements would make it a lot simpler. Even with measurements I'll test fit it prior to drilling. Appreciate the input.