LED cup holder

[Maddoc]

My LED cup holder rim popped off and was lost to the lake. Does anyone know where to purchase a replacement online? I live quite far from a Bennington dealership.

 

[Jack M]

Can you call a dealer and they ship it to you ? They may be generic ,try the closest boat dealer.

 

[Skno]

My LED cup holder rim popped off and was lost to the lake. Does anyone know where to purchase a replacement online? I live quite far from a Bennington dealership.

I just purchased a benny that is missing 2 of the SS top rings. Did you ever figure out if you could get replacements?

 

[LD50]

ITC makes the cupholders that Bennington uses. If it's the LED style your only choice will likely be to get new cupholders through Bennington. When I say LED style, I'm talking about the ones with the clear plastic spacer just under the ring. The only difference is that the LED one has the LED ring around the base of the cupholder.

It it doesn't have that spacer, it might be one of these:

Plastic Drink Holder - Two Pack

Robust plastic RV & Boat drink holders offering enhanced durability while being lightweight & easy to install. Shop now to upgrade your RV & Marine cup holders.

itcshopnow.com

ITC sells this style direct, but not the LED type.

Occasionally you can find some of the ITC stuff that's not normally for sale at Great Lakes Skipper.

 

[Skno]

ITC makes the cupholders that Bennington uses. If it's the LED style your only choice will likely be to get new cupholders through Bennington. When I say LED style, I'm talking about the ones with the clear plastic spacer just under the ring. The only difference is that the LED one has the LED ring around the base of the cupholder.

It it doesn't have that spacer, it might be one of these:

Plastic Drink Holder - Two Pack

Robust plastic RV & Boat drink holders offering enhanced durability while being lightweight & easy to install. Shop now to upgrade your RV & Marine cup holders.

itcshopnow.com

ITC sells this style direct, but not the LED type.

Occasionally you can find some of the ITC stuff that's not normally for sale at Great Lakes Skipper.

It’s the ones with the clear spacer right under the ss ring. I think they have been discontinued. I may have to buy 3 new ones if want them to match,
Thank You for the reply.

 

[LaurencetheAdventurer]

I have been having great success using Google Gemini to find me links to products I am looking for!

 

[mtudb24]

this thread has some part numbers, I think this is the RGB vs just solid blue that I had on a 2011 though

Cupholder Lighting Install

Just got my new 2019 Bennington a few weeks back so I am exploring ways to make it even better. I am looking for any info that might be out there on adding the wiring to improve my existing RGB lighting system in my 20SSRCXP. I have cupholders that appear to be the lighted type as they have...

club.benningtonmarine.com

 

[agil1215]

I can confirm that the p/n's from the link in this thread are still the same when I bought them 05/2024. I ordered 10 OEM RGB lighted cupholders from ITC (supplier of Bennington) to replace my non-lighted ones. The rep asked me if I had the Verisacolor lighted controller which I did since my boat was ordered with the toe kick lighting and RGB kicker speaker lights. I did order the OEM wiring harness from Bennington which made life a lot easier. For the cupholders I ordered the factory 4 pin connector and terminals from digikey. Lastly ordered some clam shells to cover the holes in the boat where the harness came up through the floor and some large stainless cushion clamps for the wiring harness under the desk (plus some zip ties).

Parts List for OEM RGB Lighted Cup Holders:

ITC-81429SS304-RGB RGB Lighted Cup Holder
016673 - RGB Lighted Cup Holders - Wiring Harness
DigiKey - MISC - Amphenol 4 pin electrical connectors, pins, wedges, caps
MISC - 10x Ancor marine grade SS 2.5" cushion clamps
MISC - Nylon marine clamshell cover for wiring harness holes

All that being said I did end up with unused non-lighted cupholders including stainless steel rims that I am no longer in need of sitting in my garage. If there is still a need I could ship a few of them out.

 

[Skno]

I can confirm that the p/n's from the link in this thread are still the same when I bought them 05/2024. I ordered 10 OEM RGB lighted cupholders from ITC (supplier of Bennington) to replace my non-lighted ones. The rep asked me if I had the Verisacolor lighted controller which I did since my boat was ordered with the toe kick lighting and RGB kicker speaker lights. I did order the OEM wiring harness from Bennington which made life a lot easier. For the cupholders I ordered the factory 4 pin connector and terminals from digikey. Lastly ordered some clam shells to cover the holes in the boat where the harness came up through the floor and some large stainless cushion clamps for the wiring harness under the desk (plus some zip ties).

Parts List for OEM RGB Lighted Cup Holders:

ITC-81429SS304-RGB RGB Lighted Cup Holder
016673 - RGB Lighted Cup Holders - Wiring Harness
DigiKey - MISC - Amphenol 4 pin electrical connectors, pins, wedges, caps
MISC - 10x Ancor marine grade SS 2.5" cushion clamps
MISC - Nylon marine clamshell cover for wiring harness holes

All that being said I did end up with unused non-lighted cupholders including stainless steel rims that I am no longer in need of sitting in my garage. If there is still a need I could ship a few of them out.

Heck yes Ill take 3 of them, let me know the details

Steve Knowles