prior to posting searched on here for similar experience and think understanding the issue but wanted to post in my “own words” this issue. Simrad unit functions fine when powering up but hitting a wake it powers off then resets requiring me to reach (interrupting my usual very relaxed position) to hit ”accept“ and keep on going. normally it requires hitting a bigger wake but sometimes it may be just a small one while a larger one won’t trigger the reset. It’s very annoying. Dealer has attempted to fix once with the obvious tightening of the connections. Yesterday prior to a boat ride I detached and reconnected, even wrapped electrical tape to help strength connection—no luck.
Issues:
1) connection on back and apparently what should be a simple fix I failed in fixing. Dealer has attempted once as well.
2) saw where someone said something on this board about similar issue mentioning bad fuse—clueless as to what this means
3) connection wire just bad and new one might be the fix?
4) cntrl alt delete and have dealer warranty with a new one
btw, it’s a 2016 SX Premium with Yammy 2 Hundy
Issues:
1) connection on back and apparently what should be a simple fix I failed in fixing. Dealer has attempted once as well.
2) saw where someone said something on this board about similar issue mentioning bad fuse—clueless as to what this means
3) connection wire just bad and new one might be the fix?
4) cntrl alt delete and have dealer warranty with a new one
btw, it’s a 2016 SX Premium with Yammy 2 Hundy