Solas Rubex L3 props

jolofree

New Member
Messages
4
Reaction score
0
Anyone have any reviews or experience with a Solas RUBEX L3 9571-155-17 SS prop ? 


It's a 15.5 X 17.  I'm thinking about trying it out on my 2275GS w/ a Yamaha VMAX 150 HPDI,


I don't know much about Solas props, how would this prop compare to a Enertia or Quicksilver Q3?


I'm concerned I may be a over-propped with that size, but I'm not usually heavily loaded.


Thanks,  jf
 
The Enertia prop is a great and expensive prop.  Our 150HP swings a 15" pitch Enertia and it is perfect for the boat. 
 
I would think in the 15 range as well for a 150. Pretty sure my 250 is spinning a 17, so might be a bit much for a 150. Actually, I think my 200 had a 15 as well.
 
Well......you have a 2 stroke 150 with a 2:1 gear ratio, which just happens to be the same as the 4 stroke F150.  The F150's run well with a 15 pitch.  I have a bit of experience with the Solas L3's.  The Solas props tend to measure 1-2 degrees in pitch higher than stamped, therefore, I would definitely opt for the 15p, as the 17p will definitely be too much prop.
 
Back
Top