TomS
Well-Known Member
I'm considering a 2275RCW Limited with a Yamaha 250 SHO for delivery in the spring. Looking at the specs, deck length is 23'6" and 24'1" LOA and the Yamaha motor is about 38" front to back, so overall it is at least 27'6" total.
I'll have a Summit Marine HL4400 hydraulic lift with 3 sets of toon bunks, which operates similar to a cantilever lift.
The canopy I'm looking at is from Touchless Boat Covers and extends down on all 4 sides to the deck such that the boat/motor is completely inside. Inside width of the lift is 114", so 28' x 10' should be about right to completely over the back of the motor in down position. Summit has some similar canopy options available in the spring as well.
Any thoughts from RCW owners how much actual clearance I'd need, since I don't have access to a boat/motor combo to measure in person?
Does anyone have any experience with the Touchless brand covers?
I'll have a Summit Marine HL4400 hydraulic lift with 3 sets of toon bunks, which operates similar to a cantilever lift.
The canopy I'm looking at is from Touchless Boat Covers and extends down on all 4 sides to the deck such that the boat/motor is completely inside. Inside width of the lift is 114", so 28' x 10' should be about right to completely over the back of the motor in down position. Summit has some similar canopy options available in the spring as well.
Any thoughts from RCW owners how much actual clearance I'd need, since I don't have access to a boat/motor combo to measure in person?
Does anyone have any experience with the Touchless brand covers?