Wild and Free
Well-Known Member
Figured as long as I was in picture mode and it takes months for me to get around to these things I would do it all at once.
Took a couple shots of how I modified my factory Shorelandr' trailer guide ons. They amounted to a 2X4 steel tube with a carpeted 2X4 bolted to the outer side of it which just got destroyed the first few windy day loads so I had some 3 1/2 inch schedule 40 pvc I had hammered over the top of the steel upright after I had removed the carpeted wood junk, I had used it that was for a few years but it looked like hell so I got some bigger 4 inch schedule 40pvs with some nice caps and made them a bit higher as the lifting strakes and the skegs of the ESP package would want to climb up the previous ones due to being a couple inches too short and not having caps on top.
After several loading with the new design they work awesome now.
Took a couple shots of how I modified my factory Shorelandr' trailer guide ons. They amounted to a 2X4 steel tube with a carpeted 2X4 bolted to the outer side of it which just got destroyed the first few windy day loads so I had some 3 1/2 inch schedule 40 pvc I had hammered over the top of the steel upright after I had removed the carpeted wood junk, I had used it that was for a few years but it looked like hell so I got some bigger 4 inch schedule 40pvs with some nice caps and made them a bit higher as the lifting strakes and the skegs of the ESP package would want to climb up the previous ones due to being a couple inches too short and not having caps on top.
After several loading with the new design they work awesome now.
Last edited by a moderator:
