Trim gauge not working
- Thread starter Kenter
- Start date
skiteton
Member
- Messages
- 8
- Reaction score
- 2
Subscribing.
There are times ours doesn't move at all, times that it doesn't move until the motor is more than halfway up, and times it works normally.
There are times ours doesn't move at all, times that it doesn't move until the motor is more than halfway up, and times it works normally.
Jimmy & Jacquie
Member
I have a 2007 2275 RL with a 150 Yamaha on it. My gauge didn't work when I bought it and I found that it was the plastic ring at the front of the motor that has a small tab that manually moves the trim gauge via cable as the motor moves. My ring was broken so it just slipped on the shaft. Common problem I read. Removed and replaced it with a new metal ring/tab and all works fine now. If yours uses the same system that ring could be either loose or broken.
AuthorizedUser
Well-Known Member
The trim gauge on mine is far from perfect. It moves when I trim, but there is no real ‘scale’ to its movements.
Jimmy & Jacquie
Member
Same for mine on the 2007. Gauge will move from full down to full up but it's nowhere near precise. I often end up visually checking it anyway.