We have been out of touch the past few days on the lake but I finally have a little update. I turned the plastic latches around so that they latch by pulling them to the rear instead of the front. I ran with the bimini open all weekend on some extremely rough water at speeds up to mid 30's...
OK, so we ordered the curved bimini on our Qsb thinking it looked better than the standard with the curves on our Q, we still think so but.......
I've been on many Benningtons with the standard bimini over the years and even more lately. Even though you're not supposed to run very fast with...
The part that's confusing me on our boat is the fact that is seems to run it's best when it's full of fuel, that makes me believe that the 3rd hole is just a little to high. I've been swamped lately and haven't had a chance to go back to the 16P prop but I am switching back and running it a...
With it up 2 holes and around half tank of fuel I had 6 adults up front and there was a noticeable amount of cavitation and I had a hard time keeping it trimmed at slower speeds 18-25mph.
That's exactly where mine started at. You will see a big difference. I will suggest only going up one hole if you have many people riding in the front of your boat. We're always loaded light but the few times I had more people in the front I think it would have done better only one hole up...
I have a 25Q swing back with the 350 Verado. I'm on the 3rd prop and the trim of course has been different with each setup. Originally the motor was mounted all the way down running a 15x15 enertia prop and the trim was from 2.0-2.2 at top speed of 50.5mph and 6500rpm's
Second setup was...
Hi all, I'm looking for a nice Honda Aquatrax jet ski. I would consider any F series but would love to find a F15x, if you have or know of one for sale let me know please.
Prop finally came in and I have some data, unfortunately I was less than impressed with this change. My mph went up from 52.5 to 53.8 and probably actually a little more since the 53.8 was leaving the dock completely full of fuel and on the least rough water we had over the holiday weekend so it...
I think according to your numbers you have more than a prop issue. If you're trimmed properly and your prop is an 11 pitch and you're only turning 6200 I would look at the motor mounting height, If the motor is mounted to low it will reduce your rpm's. My boat is larger and higher hp but I had...
We test drove a couple of 23ft boats with the 300 on them and they performed great. We saw 47-48 easily on both with light loads but also brand new so they weren't broken in yet. Also didn't pay any attention to the mounting location or the props on the test drives so could be more mph with some...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.