I recently got a new to me 2004 2250RL tri-toon with lifting strakes on all the toons, and a 150 honda on it. I was expecting to be able to do ~ 35 mph - 37 MPH based on what I have been reading here. Best I can do is 30-32 MPH running about 1/8 trim at ~ 5000 RPM. The propeller is a powertech stainless 4 blade. Hard to read the laser etched numbers, but I saw a 20P on the prop so I am thinking a 20 pitch. Not sure on diameter. I am thinking this is over propped. Also mounting hole is #1 (i.e. engine mounted in lowest position)
I want to use this for some water sports / tubing (minimize venilation in a turn) , and I am hoping I can get ~33 with a moderate load and 35 - 37MPH lightly loaded.
Is this achievable? - can someone help me out?
Thanks!
I want to use this for some water sports / tubing (minimize venilation in a turn) , and I am hoping I can get ~33 with a moderate load and 35 - 37MPH lightly loaded.
Is this achievable? - can someone help me out?
Thanks!
Last edited by a moderator: