Welcome to Club Bennington

An official club forum for Bennington boats

Login Register

I found some unused factory wiring.

Discussion in 'Do-It-Yourself Projects' started by entremanure, Nov 28, 2017.

  1. entremanure

    entremanure New Member

    Messages:
    1
    Likes Received:
    0
    Location:
    The Ozarks
    I have a new to me 2000 207L and found some unused wires while upgrading to LED docking lights. The two wires (one white, one green) have pink crimp on terminals and are located under the deck directly below the docking lights. Anyone know what these are? Are they switched? Thanks in advance for your help.
     
  2. Spoiledrotten

    Spoiledrotten Well-Known Member

    Messages:
    1,379
    Likes Received:
    778
    Location:
    Below the Mason/Dickson Line
    Just might be for a live well that will "usually" be in a front compartment.
     
  3. myv10

    myv10 Well-Known Member

    Messages:
    181
    Likes Received:
    91
    Location:
    Pittsburgh, Pa.
    My 2003 had the same wires going to the front speakers,
     
  4. mattb

    mattb Well-Known Member

    Messages:
    536
    Likes Received:
    393
    Location:
    Central Ohio
    Some of the older boats had the horn under the front
     
  5. Maynard G. Krebs

    Maynard G. Krebs Well-Known Member

    Messages:
    224
    Likes Received:
    110
    My '06 had two sets of unused wires that terminated below deck at the bow. One set was for additional speakers and were already wired into the stereo. The other set is for additional interior task lights and are already hooked to one of the rocker switches. I found the bow corner boxes were pre-drilled for both options so adding either option was as simple as cutting away the vinyl covering the holes and popping them in.
     
    cwag911 likes this.

Share This Page