Welcome to Club Bennington

An official club forum for Bennington boats

Login Register

Swivel Seat base (parts)

Discussion in 'Pontoon Forum' started by MrG, Jun 7, 2019.

  1. MrG

    MrG Well-Known Member

    Messages:
    556
    Likes Received:
    370
    Location:
    Lake Tulloch Ca
    C1B914AB-576A-4BAF-BE82-87277E8DEE89.jpeg Hey I have a 2012 2575 QCW.
    It has the swivel seat base (photo below) when you remove the Seat the post has a black plastic insert (Male portion) as well as the Seat itself has a black plastic (female portion) I’m looking for these 2 plastic parts. My seat has a bit of back and forth, and the plastic seems to be breaking down and leaving small portions of plastic on my floor. Looking to find out the maker of the seat base and order these parts.
    I’m sure they are not a Dealer only part. Thanks
     
  2. Major K

    Major K Member

    Messages:
    18
    Likes Received:
    35
    Location:
    Cincinnati
    Mr.G I believe it’s Springfield. I’m in the process of trying to find an adjustable seat pedestal.
    Overton’s also has a 30% off promotion code (Waterfun30)
     

    Attached Files:

  3. MrG

    MrG Well-Known Member

    Messages:
    556
    Likes Received:
    370
    Location:
    Lake Tulloch Ca
    Thanks for the Reply but that’s Defiantly NOT the one I have.
     
  4. MrG

    MrG Well-Known Member

    Messages:
    556
    Likes Received:
    370
    Location:
    Lake Tulloch Ca
  5. Skeester

    Skeester Member

    Messages:
    18
    Likes Received:
    18
    I have this exact seat and I got that part from my dealer for $11. They had it in stock, so I didn’t bother even looking for a part number. I suggest calling your dealer.
     
  6. Skeester

    Skeester Member

    Messages:
    18
    Likes Received:
    18
    I had the exact seat in the OP and this is the replacement I got from the dealer, and I got it cheaper!
     
  7. MrG

    MrG Well-Known Member

    Messages:
    556
    Likes Received:
    370
    Location:
    Lake Tulloch Ca
    Ok I will check out springfield I was sent a email confirming its NOT a WISE product they say they have never made one for Bennington. Thanks for the Springfield reff
     
  8. MrG

    MrG Well-Known Member

    Messages:
    556
    Likes Received:
    370
    Location:
    Lake Tulloch Ca
    Ok So Here is the info you need to know
    The bushing for the top of the post is 7110157 and the bushing that goes in the seat mount is 2171009. Both of these can be purchased through www.cascadedepot.com

    seat.PNG
     
    sunedog and Major K like this.
  9. MrG

    MrG Well-Known Member

    Messages:
    556
    Likes Received:
    370
    Location:
    Lake Tulloch Ca
    B7C05CDD-9A62-4588-8A9A-385636911D19.jpeg I ordered and received the plastic parts but they don’t fit. I’m thinking that Springfield may not be the maker of this seat base here is a photo of my seat base
     

Share This Page