Back to the main site

Won't Start

Cliffhanger77

Cliffhanger77

New Member
Messages
3
Reaction score
4
Can anyone help me ? I have a 2019 QX and i can't get started ! replaced battery and breaker that's inline in battery compartment, but trim switch on motor or shift handle doesn't work and won't start! Any ideas if there's another fuse or relay somewhere ?
 
Check your safety switch
 
Make sure it’s in neutral

opps you said shift handle doesn’t move. Never mind then
 
See if you have voltage on the red wire to the trim button. Pop out the button and make sure the wire isn’t broken. I had this problem before on my other boat. Good luck
 
Most of the time it's the safety (neutral) switch build into the throttle. However, the fact that your trim doesn't work makes this sound like a no power scenario. Just in case, don't just wobble it a little to make sure it's in neutral, go ahead and cycle it forward and back (in and out of forward and reverse gear) and then stop in neutral and see if that fixes it. Do the same with the safety (lanyard) switch ... remove and reinstall it.
 
You must log in or register to reply here.
Back
Top