175 vmax on a 23 LSB SPS. The odd duck motor?

BobbyZ

Active Member
Messages
29
Reaction score
3
Looks like ur in 2nd hole from top
I'm gonna move mine into 2nd hole as well . I think hole 1 makes it sit too low in water creating more drag. Ur specs are inline with others that are in hole 2. What rpm do u pull with light load 1 or 2 ppl and what do u pull loaded when ur hitting mid to upper 30's?
 

Outbackeagle

Member
Messages
16
Reaction score
18
I'm gonna move mine into 2nd hole as well . I think hole 1 makes it sit too low in water creating more drag. Ur specs are inline with others that are in hole 2. What rpm do u pull with light load 1 or 2 ppl and what do u pull loaded when ur hitting mid to upper 30's
 

Outbackeagle

Member
Messages
16
Reaction score
18
Loaded its 5500 rpm at 36-38mph light load is 5900-6000 rpm 40-41mph. The last few times out it seemed on the lower side of the mph for each load but I think I need to clean the growth off my toons. I leave it in the water for the season.
 

BobbyZ

Active Member
Messages
29
Reaction score
3
Loaded its 5500 rpm at 36-38mph light load is 5900-6000 rpm 40-41mph. The last few times out it seemed on the lower side of the mph for each load but I think I need to clean the growth off my toons. I leave it in the water for the season.
Gotcha. My dealer is gonna move the motor up a hole for 30 min labor. I think that will put me where I need to be. Thx man
 

dieselman

Member
Messages
15
Reaction score
18
The 150 SHO has 2.01 gears the 175 SHO and F 200 have 1.86 gears and as stated all run the same 2.8 block but the F 200 doesn't have the same valve timing. I have a 2022 SXRX 22 on order and first went with the 150 SHO but have asked to up it for the 175 SHO and hope I get it in April 2022
 
Top