Outbackeagle
Member
- Messages
- 21
- Reaction score
- 23
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
175 vmax on a 23 LSB SPS. The odd duck motor?
- Thread starter enevs22
- Start date
Outbackeagle
Member
- Messages
- 21
- Reaction score
- 23
I'm still at 36-38 mph with a full load and 40-41 with a light load
I'm gonna move mine into 2nd hole as well . I think hole 1 makes it sit too low in water creating more drag. Ur specs are inline with others that are in hole 2. What rpm do u pull with light load 1 or 2 ppl and what do u pull loaded when ur hitting mid to upper 30's?Looks like ur in 2nd hole from top
Outbackeagle
Member
- Messages
- 21
- Reaction score
- 23
I'm gonna move mine into 2nd hole as well . I think hole 1 makes it sit too low in water creating more drag. Ur specs are inline with others that are in hole 2. What rpm do u pull with light load 1 or 2 ppl and what do u pull loaded when ur hitting mid to upper 30's
Outbackeagle
Member
- Messages
- 21
- Reaction score
- 23
Loaded its 5500 rpm at 36-38mph light load is 5900-6000 rpm 40-41mph. The last few times out it seemed on the lower side of the mph for each load but I think I need to clean the growth off my toons. I leave it in the water for the season.
Gotcha. My dealer is gonna move the motor up a hole for 30 min labor. I think that will put me where I need to be. Thx manLoaded its 5500 rpm at 36-38mph light load is 5900-6000 rpm 40-41mph. The last few times out it seemed on the lower side of the mph for each load but I think I need to clean the growth off my toons. I leave it in the water for the season.
The 150 SHO has 2.01 gears the 175 SHO and F 200 have 1.86 gears and as stated all run the same 2.8 block but the F 200 doesn't have the same valve timing. I have a 2022 SXRX 22 on order and first went with the 150 SHO but have asked to up it for the 175 SHO and hope I get it in April 2022
I have a sx23 premium with the SPS package with a Vmax 175. Loaded with 6 people in windy conditions I was at 38 mph and had more throttle to go. I had to stop because my Lilly pad floating mat on the bow flew up. I'm just 5 hrs into my break in. I think I'll be in the 44 mph range with a light load and calm water I have a 14.5x15 stainless prop that was dealer installed. The motor has great throttle response and power. So far I'm pleased. I'm going from a 60hp 2 toon boat so this is a different animal all together. Plus the vmax looks better in my opinion.. Good luck with your boat!
Gotcha. My dealer is gonna move the motor up a hole for 30 min labor. I think that will put me where I need to be. Thx man
Do you notice any prop blow out or cavitation? How far are u able to trim before ventilation? Cornering tight without blowout? You have a Yamaha reliance prop?I have a sx23 premium with the SPS package with a Vmax 175. Loaded with 6 people in windy conditions I was at 38 mph and had more throttle to go. I had to stop because my Lilly pad floating mat on the bow flew up. I'm just 5 hrs into my break in. I think I'll be in the 44 mph range with a light load and calm water I have a 14.5x15 stainless prop that was dealer installed. The motor has great throttle response and power. So far I'm pleased. I'm going from a 60hp 2 toon boat so this is a different animal all together. Plus the vmax looks better in my opinion.. Good luck with your boat!
Last edited: