Back to the main site

Anyone have problems with Simrad depth finder

B

beachliving

New Member
Messages
4
Reaction score
1
I have a 2018 Bennington, with a Simrad G05 GPS. My depth finder works fine at slow speeds but when I get up around 4000 rpm's it cuts out. Does anyone have the same problem. Thanks
 
Adjust the angle or drop it down some.
 
beachliving said:
I have a 2018 Bennington, with a Simrad G05 GPS. My depth finder works fine at slow speeds but when I get up around 4000 rpm's it cuts out. Does anyone have the same problem. Thanks
Click to expand...

If you search through the forums and online you will find a few different posts/ideas on this very topic. It likely has nothing to do with the Simrad, and everything to do with your transducer. I pasted in two links below that if you make some adjustments to how/where your transducer is mounted, you will likely solve the problem.

Many of us have the same issue due to how/where our transducer is mounting on the back of the boat. Some of the posts offer up some good advice on how to change the way its mounted, and/or its angle, so that it will work better at higher speeds.

Good Luck!

http://club.benningtonmarine.com/threads/transducer-success.8691/#post-116540

http://www.sternmate.com/Where.html
 
You must log in or register to reply here.
Back
Top