Nat
Active Member
- Messages
- 38
- Reaction score
- 10
Thank you. Worst years of my life. Not done yet, BUT look what I have to look forward to this year! Isn’t she a beauty?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Same… no power to stereo or depth finder..,How do you reset a fuse???
Is your problem same as original post where everything on the dashboard control panel does not work or is it just the stereo and depth finder? If your symptom is the same then it is probable that the problem is in the battery area because that is where the power comes from for the entire dashboard. The fuse to the entire dashboard is in that area. If your boat is equipped with a power shut off switch the fuse would be connected to that. I have never seen a resettable fuse but that is possible. Another potential problem is the black ground wire going to the negative post on the battery. If this wire is not reconnected during battery replacement that would cut all power to the dashboard. Once again, does your problem have the same symptom as the original post?
Your dealer is in competent. They should diagnose the problem rather than sending you a box of switches.Fuses checked, Dealer sending all new switches. Could be worse I guess.
Happy Easter Y’all!
Well I agree I guess. But he did say there were issues that year… remember we bought her and it’s been in their storage for 3 years. Also, the dealer is 3 hours away.Your dealer is in competent. They should diagnose the problem rather than sending you a box of switches.
I'll guess that replacing all the switches won't fix the problem.
Four switches changed out and power is on dash. The remaining switches are on order.Well I agree I guess. But he did say there were issues that year… remember we bought her and it’s been in their storage for 3 years. Also, the dealer is 3 hours away.
All the gages are powered and light up when the key is in the on position. The gage lights are weak and can only be seen at night.I’m not sure if this is proper etiquette… Are there supposed to be some lights that come on around the gauges for back, lighting when operating at night?
David
[email protected]
We use essential cookies to make this site work, and optional cookies to enhance your experience.