Deck Trim Repair Advice Needed

[TWO2019]

My bow deck trim was damaged and I could use some advice on how to repair it. Newbie on this forum. Thanks in advance. Photos attached.

 

[SEMPERFI8387]

New piece … need to order from dealer.

 

[Pbakk]

Can you take it off and pound out the dent from the inside? It will never look like new and best bet would be a new piece from dealer. A metal fab shop might be able to get it straighter, but I doubt it will look like new. Another option is to have a 3d part printed as replacement for both sides, but still might be more expensive.

 

[Pbakk]

Another option:

 

[Pbakk]

Another option:

https://www.ebay.com/itm/168240134449?chn=ps&norover=1&mkevt=1&mkrid=711-166974-028196-7&mkcid=2&mkscid=101&itemid=168240134449&targetid=2274564709393&device=m&mktype=pla&googleloc=9020106&poi=&campaignid=22682557560&mkgroupid=180685842186&rlsatarget=pla-2274564709393&abcId=10357018&merchantid=111826545&geoid=9020106&gad_source=4&gad_campaignid=22682557560&gbraid=0AAAAAD_QDh8F6AshT-9HHm5IDL3lu4Vgd&gclid=EAIaIQobChMI2uT2qtyUlQMVp1lvBB0c9wcPEA0YAyABEgKJpfD_BwE

 

[TWO2019]

Can you take it off and pound out the dent from the inside? It will never look like new and best bet would be a new piece from dealer. A metal fab shop might be able to get it straighter, but I doubt it will look like new. Another option is to have a 3d part printed as replacement for both sides, but still might be more expensive.

I thought about taking it off, but there are two rivets on both sides so I would have to take those off somehow. Otherwise there are screws all the way around that would make it quite easy without the rivets. Thanks for the recommendations. I appreciate it.

 

[TWO2019]

Another option:

https://www.ebay.com/itm/168240134449?chn=ps&norover=1&mkevt=1&mkrid=711-166974-028196-7&mkcid=2&mkscid=101&itemid=168240134449&targetid=2274564709393&device=m&mktype=pla&googleloc=9020106&poi=&campaignid=22682557560&mkgroupid=180685842186&rlsatarget=pla-2274564709393&abcId=10357018&merchantid=111826545&geoid=9020106&gad_source=4&gad_campaignid=22682557560&gbraid=0AAAAAD_QDh8F6AshT-9HHm5IDL3lu4Vgd&gclid=EAIaIQobChMI2uT2qtyUlQMVp1lvBB0c9wcPEA0YAyABEgKJpfD_BwE

Thank you. I appreciate it.

Another option:

https://www.ebay.com/itm/168240134449?chn=ps&norover=1&mkevt=1&mkrid=711-166974-028196-7&mkcid=2&mkscid=101&itemid=168240134449&targetid=2274564709393&device=m&mktype=pla&googleloc=9020106&poi=&campaignid=22682557560&mkgroupid=180685842186&rlsatarget=pla-2274564709393&abcId=10357018&merchantid=111826545&geoid=9020106&gad_source=4&gad_campaignid=22682557560&gbraid=0AAAAAD_QDh8F6AshT-9HHm5IDL3lu4Vgd&gclid=EAIaIQobChMI2uT2qtyUlQMVp1lvBB0c9wcPEA0YAyABEgKJpfD_BwE

Thank you. I appreciate it.

 

[Pbakk]

The rivets are easy to remove. Just drill them out. Also easy to install with cheap rivet gun. Another option:

 

[TWO2019]

Another option:
View attachment 37893

Thank you. I appreciate it.

 

[TWO2019]

My bow deck trim was damaged and I could use some advice on how to repair it. Newbie on this forum. Thanks in advance. Photos attached.

Thanks everyone for your replies. Much appreciated!